AUTO AIR FEMALE CONNECTOR SERVICE KIT
EV50BKIT – Service Kit for Auto Air Female Connector (EV50B or GC1A)
Complete O-rings, seals, springs and bearings kit for either the EV50B or GC1A AutoAir type snap connectors.
Please Note: Replacement of these internal parts requires the
AUTO AIR HOSES
EV50 – Auto Air Hoses
Available in 4 lengths:
EV50/24 – 24″/610mm – for Auto Airs fitted to S,M & Large AP (& BUDDY) BCDs and all post 2008 AP Rebreathers EV50/27 – 27″/690mm – for Auto Airs fitted to all pre 2008 AP Inspiration
AUTO AIR SNAP CONNECTOR (POST 2009)
EV50B – Auto Air Snap Connector post 2009
Replacement part for Auto Air hoses (post 2009 only)
The hose fittings can be easily removed and re-fitted so that the hose length can be shortened to suit the diver – or repaired if damaged.
FEMALE SNAP CONNECTOR FOR GCS
GC1A – Female Snap Connector only
The removable female quick release end of the Gas Connector System has a 9/16″ UNF thread connection to the hose which is a standard 2nd stage thread and therefore it can be connected to any make of regulator hose, except Poseidon.
FLOWSTOP LOCKING STRAP
RB70/25 – Flowstop Locking Strap
Used with the GC3 AP FLOWSTOP inline gas shutoff valve.
GC3 – Flowstop in-line Gas isolator
The Flowstop is a high performance in-line gas isolator, perfect for isolating your ADV. It is a high-flow design offering less restriction than others available and so can also be used to isolate high-volume open circuit 2nd stages or off-board diluent
GCS HOSE – 2ND STAGE + MALE FITTINGS
GC2/24 – Hose with Male end of the GCS and standard (9/16″ UNF female) 2nd stage end
Consists of a 24″ AP300 regulator hose with the male half of the GCS (connects with the female snap connector of GC1/24) on one end and a standard (9/16″ UNF female) 2nd stage
GCS Hose 24″ – 1st Stage + Female Fittings
GC1/24 – Hose with Female Snap Connector and 1st Stage End
The GC1/24 consists of a 24″ hose with a reusable 3/8″ UNF fitting on one end (to fit a 1st stage LP port) and a female snap connector (to connect to the male hose GC2/24) on the other.
GCS HOSE 39″ – 3/8″ UNF + MALE FITTING
GC4/39 – 39″ hose with the male end of the GCS and a standard (3/8″ UNF) 1st stage end
The gas will only flow in one direction, from the male end towards the 3/8″ UNF end. Standard length 39″.
N.B. The male end will connect to the female connection of any
GCS MALE CONNECTOR (ONLY)
GC2A – Male End of the GCS
Will connect to the female end of any EV50 (Auto Air) hose
GCS100 – COMPLETE KIT
GCS100 – Gas Connector System 100
The heart of the Gas Connector System consists of 2 quick release hose fittings, one male and one female. The hose with the male fitting connects to your OCB (BOV) or a 2nd stage and the female connects to the intermediate (low) pressure port of your first stage.
GCS100A – COMPLETE KIT
GCS100A – Gas Connector System 100A
GCS Kit c/w Hoses (without Flow-Stop)
The heart of the Gas Connector System consists of 2 quick release hose fittings, one male and one female. The hose with the male fitting connects to your OCB (BOV) or a 2nd stage and