Rebreather Accessories

  • You've just added this product to the cart:

    CELL VALIDATOR

    0 out of 5

    CELL VALIDATOR

    RB15 – The AP Cell Validator

    The AP Cell Validator has been designed to check the oxygen control parameters including the speed of response and accuracy of the oxygen cells within an AP Diving rebreather.

    $134.99
  • You've just added this product to the cart:

    CUSTOM REBREATHER HOSE TIDY (PAIR)

    0 out of 5

    CUSTOM REBREATHER HOSE TIDY (PAIR)

    RBHT/CSTM – Custom Rebreather Hose Tidy (pair)

    For all AP Rebreathers with Back Mounted Counterlungs.

    The combined neoprene and cordura Hose Tidy encases both the inflator hoses and contents gauge as shown.

    Your custom embroidery will be on the left-hand (Diluent) Hose

    $99.99
  • You've just added this product to the cart:

    CYLINDER VALVE ADAPTOR - M26 FEMALE / 5/8" BSP MALE

    0 out of 5

    CYLINDER VALVE ADAPTOR – M26 FEMALE / 5/8″ BSP MALE

    AP8R – M26 Female / 5/8″ BSP Male Cylinder Valve Adaptor

    For gas-filling when travelling in Europe and/or adapting a 5/8″ BSP cylinder valve to accept a M26x2 first stage or compressor connector.

    $27.99
  • You've just added this product to the cart:

    CYLINDER VALVE ADAPTOR 5/8" BSP FEMALE / M26 MALE

    0 out of 5

    CYLINDER VALVE ADAPTOR 5/8″ BSP FEMALE / M26 MALE

    AP8N – Cylinder Valve Adaptor 5/8″ BSP Female / M26 Male

    For gas-filling when travelling in Europe and/or adapting an M26x2 cylinder valve to accept a 5/8″ BSP first stage, compressor connector or O2 whip.

    $27.99
  • You've just added this product to the cart:

    D-RING AND WEBBING LOOP

    0 out of 5

    D-RING AND WEBBING LOOP

    BK30 – 50mm Stainless Steel D ring and Webbing Loop

    For attachment of an extra D ring to any area of 50mm webbing or waistband.

    May be used with either BK14 (plastic) or JJ4 (stainless steel) 3-

    $14.99
  • You've just added this product to the cart:

    ELASTIC HANDSET STRAP

    0 out of 5

    ELASTIC HANDSET STRAP

    RBV60 – Elastic Handset Strap

    $9.99
  • You've just added this product to the cart:

    FEMALE SNAP CONNECTOR FOR GCS

    0 out of 5

    FEMALE SNAP CONNECTOR FOR GCS

    GC1A – Female Snap Connector only

    The removable female quick release end of the Gas Connector System has a 9/16″ UNF thread connection to the hose which is a standard 2nd stage thread and therefore it can be connected to any make of regulator hose, except Poseidon.

    $69.99
  • You've just added this product to the cart:

    FLOWSTOP LOCKING STRAP

    0 out of 5

    FLOWSTOP LOCKING STRAP

    RB70/25 – Flowstop Locking Strap

    Used with the GC3 AP FLOWSTOP inline gas shutoff valve.

    $11.99
  • You've just added this product to the cart:

    GC3 FLOWSTOP

    0 out of 5

    GC3 FLOWSTOP

    GC3 – Flowstop in-line Gas isolator

    The Flowstop is a high performance in-line gas isolator, perfect for isolating your ADV. It is a high-flow design offering less restriction than others available and so can also be used to isolate high-volume open circuit 2nd stages or off-board diluent

    $69.99
  • You've just added this product to the cart:

    GCS HOSE - 2ND STAGE + MALE FITTINGS

    0 out of 5

    GCS HOSE – 2ND STAGE + MALE FITTINGS

    GC2/24 – Hose with Male end of the GCS and standard (9/16″ UNF female) 2nd stage end

    Consists of a 24″ AP300 regulator hose with the male half of the GCS (connects with the female snap connector of GC1/24) on one end and a standard (9/16″ UNF female) 2nd stage

    $89.99
  • You've just added this product to the cart:

    GCS HOSE 39" - 3/8" UNF + MALE FITTING

    0 out of 5

    GCS HOSE 39″ – 3/8″ UNF + MALE FITTING

    GC4/39 – 39″ hose with the male end of the GCS and a standard (3/8″ UNF) 1st stage end

    The gas will only flow in one direction, from the male end towards the 3/8″ UNF end.  Standard length 39″.

    N.B. The male end will connect to the female connection of any

    $109.99
  • You've just added this product to the cart:

    GCS MALE CONNECTOR (ONLY)

    0 out of 5

    GCS MALE CONNECTOR (ONLY)

    GC2A – Male End of the GCS

    Will connect to the female end of any EV50 (Auto Air) hose

    $69.99