OXYGEN MANUAL INFLATOR (BMCL)

$148.99

RBV05A – Oxygen Manual Inflator (BMCL) for the AP Back Mounted Counterlungs

The Oxygen Inflator and hose assembly is designed specifically for use with the AP Back Mounted Counterlungs.

The assembly consists of 3 parts:

Oxygen Inflator block (with green button) Hose (Inflator block to

SKU: RBV05/1
  • Description
  • Additional information
  • Reviews (0)

Description

RBV05A – Oxygen Manual Inflator (BMCL) for the AP Back Mounted Counterlungs

The Oxygen Inflator and hose assembly is designed specifically for use with the AP Back Mounted Counterlungs.

The assembly consists of 3 parts:

  • Oxygen Inflator block (with green button)
  • Hose (Inflator block to Counterlung inlet – available in 3 sizes)
  • Inlet Post (replaces blanking plate on counterlung)

Hose Lengths

Please specify the hose length required when ordering.

Existing customers: 

The hose length is determined by your current counterlung size (see label on the back):

Evolution / Evolution Plus / Inspiration EVO / Inspiration EVP
Medium Counterlung – you need the 70cm hose
Large – 76m
XLarge – 76cm

Inspiration / Inspiration XPD
Medium Counterlung – you need the 76cm hose
Large – 84cm
XLarge – 84cm

New customers: 

To measure: wearing trousers with a belt and a T shirt, measure from the lower edge of the belt at the front, over-the-shoulder and down to the belt at the back. Take the measurement on inhale.

Under 110cm/43.3″ = you need the 70cm hose for the Evolution/Evolution Plus or the 76cm hose for the Inspiration
Over 110cm/43.3″ = you need the 76cm hose for the Evolution/Evolution Plus or the 84cm hose for the Inspiration

Please contact the factory on 01326 563 834 if you need further advice on sizing.

If in doubt you should order the larger size. The hose length can be easily shortened to suit your preference by removing the reusable fitting at the inflator block end, cutting the hose as required and re-fitting. Full instructions on how to do this are included in the BMC manual.

Additional information

Weight 2 lbs
Dimensions 2 × 2 × 1 in

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.